Schacht Low Castle Floor Weaving Looms

All Standard floor looms may be ordered with Eight Shafts or the Four-Now-Four-Later shaft options. Schacht Weaving Looms are built-to-order, therefore you can expect a 4-6 week delay for build time. Please call 805 686-1192. The number of shafts you choose will depend on the kind of weaving you intend to do. Though most weave structures can be woven on four shafts, additional shafts increase your pattern options extensively. If you have a keen interest in pattern drafting and weave structures, eight shafts will allow you to fully develop this interest.

The Schacht Standard floor loom has an underslung jack mechanism to raise the shafts. The jacks pivot from two points equidistant from the center and lift the shafts by pushing up on the center point. Schacht employs a parallel lamm system which gives their looms a light treadling action. Because of this parallel lamm, it isn't necessary to adjust the tie-up cords on these floor looms.

The tie-up system is quick and easy to use. Pre-measured nylon tie-up cords hang from the lamms and are attached to a treadle by sliding the appropriate cords into the treadle slot. This makes changing tie-ups very fast.

Other special features of the Standard floor looms include: friction reducing aluminum shaft channels, a back beam which folds with or without a warp on the loom, removable back and breast beams, stainless steel reed, stainless steel heddle bars, and an adjustable open-sided beater. The braking system employs a ratchet and dog on the cloth beam and a friction brake on the warp beam. All options are extra.