Bluster Bay End-Feed Shuttles
For perfect selvedges and speedy weaving, many weavers prefer to use end-feed boat shuttles. These boat shuttles use special end-feed bobbins (called pirns) that do not spin. Rather, the yarn is released off the end of the stationary pirn, through a tensioning device and then out the side of the shuttle.
Bluster Bay end-feed shuttles:
Bluster Bay End-Feed Boat Shuttles are available in three lengths [ 11", 13", and 15" ] with either open or closed bottoms.
13" & 15" End-Feed Boat Shuttles
These are the standard Bluster Bay end-feed shuttles that weavers have been using and raving about since 1996! Bluster Bay 13-inch and 15-inch end-feed shuttles are 1.875 inches wide. Open-bottom shuttles are 1.375 inches tall. Closed-bottom shuttles are 1.5 inches tall. The bronze center spindles are spring-loaded. The 13" end-feed shuttles use 5.5" wood or 5.5" Bluster Bay white plastic pirns . Note: 6" Schacht wood or red plastic pirns will NOT fit these 13" end-feed shuttles.The Bluster Bay 15" end-feed shuttles use 8" Schacht wood or 8" Bluster Bay white plastic pirns.
Shuttles are shown with pirns... but, shuttles come without pirns, order them separately if you need them.
Using Hook & Eye Tension End-Feed Shuttles:
Pirns. . . for End Feed Shuttles + & Quills are here too
Bluster Bay HOOK TENSIONED "MINI" 11" End-Feed Shuttles