Viking Stainless Steel Reeds

We sell ONLY stainless steel reeds in many standard sizes. These "Viking" reeds are the standard 'pitch' reed used by many loom manufacturers for decades (Swedish made, lighter weight reeds, wrapped top and bottom with a pitch covered cord and then the cord is covered with a protective strip of silver tape) - ***these reeds are approximately ½" thick***. No Rust! ie. a 16" Ashford table loom uses a 16.75" reed. A 22" Norwood loom uses a 22.5" reed. A 26" Schacht Baby Wolf*** uses a 27"x 4.5" reed. A 36" Harrisville uses a 37" reed. Most 45" looms use a 46.5" reed.

If you want one of these reeds shortened in length, we can do that. Choose a reed long enough to accommodate the overall length and height you want it cut to("buy" it, that's the price of the basic reed), click on "cut to length" and specify the overall length (including end pieces) you want. This adds a $3 cutting charge to your order.

Note: If we cut the reed for you there is *NO* return accepted so measure carefully.

Special Caution for Schacht Loom Owners: A few years ago Schacht started supplying heavy duty reeds that are heavier and have plastic pieces installed on the top and bottom edges of the reed (see our "Special-Made Stainless Steel Heavy Duty Reeds"). . . at the same time, they changed the width of the bottom reed groove on the beater bar. When they did that, many 'pitch' reeds would no longer drop down into the bottom groove (A 'Pitch" reed is one constructed with a cord [covered with black 'pitch'] wrapped around the top and bottom parts of the reed). 'Pitch' reeds usually have a silver tape covering the top and bottom wrapped cord (as ours do). On a Schacht loom, if the reed groove is wider in the vertical arms of the beater bar than the groove in the cross bar in the beater bar. . . you 'probably' need to order the "Special-Made Stainless Steel Heavy Duty Reeds" on a different page.

If you would prefer a heavier duty reed for any loom, order the "Special-Made Stainless Steel Heavy Duty Reeds" on a different page.

If you have any questions. . . or are not positive what to order - Call us @ 888 686-1192